Prerequisite

Before you begin:

• Complete setting up the network (make sure DNS and Search domain are set up correctly).

  Recommended configuration for the AWS Load Balancer while working with ScaleArc

  The complete duration for Aurora failover process takes about one minute. During this time, ScaleArc holds client connections in a surge queue while waiting for the new master to become available. By default, the AWS Load Balancer has an idle timeout of 60 seconds. If it is used in front of ScaleArc and if there is an Aurora failover, then the load balancer may terminate application connections after 60 seconds of idle time. To avoid such a scenario, we recommend that you set the "idle timeout" attribute of the AWS Load Balancer to 120 seconds.

Configure the Aurora server

To set up the Aurora server, follow these steps:

1. On the ScaleArc dashboard, click the Clusters tab > Add Cluster button. 

2. Complete setting up the network and database access.

3. Locate Servers on the Create Cluster screen. This is the fifth panel on the screen.
4. Select Cluster and Aurora from the drop downs.
   
   
   
   
5. Click Configure Server. 
6. Specify the Aurora nodes information. 
7. Enter the access key, access ID, region, and name of the Aurora cluster.
   
   
   
   

8. Click on Fetch Aurora Nodes. This will connect to Amazon RDS and fetch all the configured servers.
   
   
   
   

9. Click on Add Servers to add all the servers to the Aurora cluster.  
10. Click Setup Cluster to complete the setup. 
11. If you have incorrectly configured the settings, you may see an error alert.
12. Click OK. Any error appears in the Configuration log section of the screen. Review the details and address the error to complete the set up. Note that you can also download a copy of the error for your record.
    
     
     
13. Click Finish to set up the cluster.
14. When completed, the system posts a notification. 
    
    
    
    
15. The cluster appears in the control panel of the dashboard.