Last modified Jun, 21, 2017
Install ScaleArc on Google Cloud (GCP)

You can deploy ScaleArc in one of two ways on GCP:

  • Using the public image (from the marketplace)
  • Doing a custom install

Marketplace

ScaleArc database load balancing is available on the Google Cloud Platform as a virtual machine (VM) image.  The VM image contains the latest version of ScaleArc optimized for use with Google Cloud Platform Compute Engine. 

Prerequisites

You need the following to get started: 

  • Google Cloud Platform account
  • MySQL (Google Cloud Engine) database servers on cloud VMs 

Installing the ScaleArc VM 

Follow the steps below to set up a ScaleArc environment on the Google Cloud Platform using Cloud Launcher.

  1. Access ScaleArc for MySQL page in Google Cloud Launcher and click on the Launch On Compute Engine button.



  2. The Google Developers Console window opens. Create a new VM instance and specify the deployment name, zone, machine type, and boot disk.  



    The minimum VM size supported is 4 cores.  


  3. In the Firewall section, make sure to Allow HTTP, HTTPS, TCP port 22, and TCP port 3306 traffic check boxes.  


  4. Click the Deploy button.  The Google Deployment Manager confirms that ScaleArc was deployed successfully. 


Once the instance is launched, you can browse to the site address to setup ScaleArc. When you connect to the ScaleArc UI for the first time, ScaleArc presents the Initial Configuration Wizard. This wizard captures the basic system settings needed by ScaleArc to operate.  

Custom install

Prerequisites

You need the following to get started: 

  • A Google Cloud Platform account
  • MySQL (Google Cloud Engine) database servers on Cloud VMs 
  • ScaleArc 3.12 RPM installer

Deployment Procedure

Since the ScaleArc RPM installer checks for CentOS version, disk, and RAM size, a deprecated version of CentOS from Google Cloud Platform needs to be deployed to expand the disk. Follow the steps below to begin the deployment process.

  1. Login to htts://console.developers.google.com using your credential.

  2. Scroll down to Compute Engine, click Images, click Show Deprecated Images.



  3.  Select centos-6-v20170227 and click on Create Instance.



  4. Fill in the following details.

    1. Instance Name
    2. Zone (choose a zone to launch the instance)
    3. Machine type (at a minimum select n1-standard-4)
    4. In the Boot disk pop up screen, select CentOS 6, and set the disk size to 50GB or more
    5. Under Firewall settings, select Allow HTTP and HTTPS traffic



  5. Click Create to complete the VM creation.

  6. To SSH directly from your web browser in the Google Cloud Platform Console, go to the VM Instances page. In the list of virtual machine instances, click the SSH button in the row of the instance to which you want to connect.   



  7.  Run the following from the command line as a sudo user.

    # rpm -ivh "https://idblb-iso.s3.amazonaws.com/scalearc-3.11.0.2.1/RPMs/idb_installer-3.11.0.2.1-7.x86_64.rpm?AWSAccessKeyId=AKIAIIM5N6CCFZ76RTNQ&Expires=1521950132&Signature=2ELcNYFWHJfTNoyZTugL85JPaSo%3D"
  8. The following RPM is installed by default on the Google CentOS image. This RPM is not required and will cause conflicts with the deployment if it is not removed. Remove the RPM from the machine. 

    yum remove augeas-libs

    Removing the RPM will remove the below dependencies as well. 

    Dependencies Resolved
    =======================================================================================
     Package                                  Arch            Version                       Repository                                         Size
    ========================================================================================
    Removing:
     augeas-libs                              x86_64          1.0.0-10.el6                  @anaconda-CentOS-201508042137.x86_64/6.7          949 k
    Removing for dependencies:
     abrt                                     x86_64          2.0.8-40.el6.centos           @base                                             753 k
     abrt-addon-ccpp                          x86_64          2.0.8-40.el6.centos           @base                                             195 k
     abrt-addon-kerneloops                    x86_64          2.0.8-40.el6.centos           @base                                              28 k
     abrt-addon-python                        x86_64          2.0.8-40.el6.centos           @base                                              20 k
     abrt-cli                                 x86_64          2.0.8-40.el6.centos           @base                                             0.0
     abrt-libs                                x86_64          2.0.8-40.el6.centos           @base                                              28 k
     abrt-python                              x86_64          2.0.8-40.el6.centos           @base                                              52 k
     abrt-tui                                 x86_64          2.0.8-40.el6.centos           @base                                              17 k
     libreport                                x86_64          2.0.9-32.el6.centos           @base                                             1.2 M
     libreport-cli                            x86_64          2.0.9-32.el6.centos           @base                                              26 k
     libreport-compat                         x86_64          2.0.9-32.el6.centos           @base                                             7.6 k
     libreport-plugin-kerneloops              x86_64          2.0.9-32.el6.centos           @base                                              18 k
     libreport-plugin-logger                  x86_64          2.0.9-32.el6.centos           @base                                              23 k
     libreport-plugin-mailx                   x86_64          2.0.9-32.el6.centos           @base                                              33 k
     libreport-plugin-reportuploader          x86_64          2.0.9-32.el6.centos           @base                                              35 k
     libreport-plugin-rhtsupport              x86_64          2.0.9-32.el6.centos           @base                                              79 k
     libreport-plugin-ureport                 x86_64          2.0.9-32.el6.centos           @base                                              25 k
     libreport-python                         x86_64          2.0.9-32.el6.centos           @base                                              73 k
    
    
    Transaction Summary
    ===================================================================================================
    Remove       19 Package(s)
    
  9. Open a second SSH session to follow the install log for ScaleArc.

    # tail -f /var/log/scalearc-install.log
  10. Run the custom installer as shown below.

    # cd /opt/idb/bin/
    # ./custom_install.sh -c Rackspace

    The custom installer will fail while performing a precheck if an RPM of a higher version is found than what ScaleArc supports.

    Below is an example of a failure message.


  11. From "/var/log/scalearc-install.log" determine the failed RPM.

  12. Add the list of RPM's below to the ignore list.

    strace-4.8-10.el6.x86_64.rpm
    sysstat-9.0.4-31.el6.x86_64.rpm
    tar-1.23-15.el6_8.x86_64.rpm
    tcpdump-4.0.0-9.20090921gitdf3cb4.2.el6.x86_64.rpm
    tzdata-2017a-1.el6.noarch.rpm
    tzdata-2016j-1.el6.noarch.rpm
    udev-147-2.73.el6_8.2.x86_64.rpm
    util-linux-ng-2.17.2-12.24.el6_8.3.x86_64.rpm
    yum-3.2.29-75.el6.centos.noarch.rpm
    zip-3.0-1.el6_7.1.x86_64.rpm
    perl-Module-Pluggable-3.90-141.el6_7.1.x86_64.rpm
    perl-Pod-Escapes-1.04-141.el6_7.1.x86_64.rpm
    perl-Pod-Simple-3.13-141.el6_7.1.x86_64.rpm
    perl-libs-5.10.1-141.el6_7.1.x86_64.rpm
    perl-version-0.77-141.el6_7.1.x86_64.rpm
    quota-3.17-23.el6.x86_64.rpm
    rdma-6.8_4.1-2.el6_8.noarch.rpm
    selinux-policy-3.7.19-292.el6_8.3.noarch.rpm
    selinux-policy-targeted-3.7.19-292.el6_8.3.noarch.rpm
    augeas-libs-1.0.0-10.el6.x86_64.rpm
    bash-4.1.2-41.el6_8.x86_64.rpm
    cronie-1.4.4-16.el6_8.2.x86_64.rpm
    cronie-anacron-1.4.4-16.el6_8.2.x86_64.rpm
    db4-4.7.25-20.el6_8.1.x86_64.rpm
    db4-utils-4.7.25-20.el6_8.1.x86_64.rpm
    device-mapper-1.02.117-7.el6_8.1.x86_64.rpm
    device-mapper-event-1.02.117-7.el6_8.1.x86_64.rpm
    device-mapper-event-libs-1.02.117-7.el6_8.1.x86_64.rpm
    device-mapper-libs-1.02.117-7.el6_8.1.x86_64.rpm
    dmidecode-2.12-7.el6.x86_64.rpm
    dracut-004-409.el6_8.2.noarch.rpm
    dracut-kernel-004-409.el6_8.2.noarch.rpm
    grep-2.20-5.el6_8.x86_64.rpm
    initscripts-9.03.53-1.el6.centos.2.x86_64.rpm
    libX11-1.6.3-2.el6.x86_64.rpm
    libX11-common-1.6.3-2.el6.noarch.rpm
    libblkid-2.17.2-12.24.el6_8.3.x86_64.rpm
    libpcap-1.4.0-4.20130826git2dbcaa1.el6.x86_64.rpm
    libudev-147-2.73.el6_8.2.x86_64.rpm
    libuuid-2.17.2-12.24.el6_8.3.x86_64.rpm
    libxcb-1.11-2.el6.x86_64.rpm
    lvm2-2.02.143-7.el6_8.1.x86_64.rpm
    lvm2-libs-2.02.143-7.el6_8.1.x86_64.rpm
    mdadm-3.3.4-1.el6_8.5.x86_64.rpm
    mlocate-0.22.2-6.el6.x86_64.rpm
    nss-softokn-3.14.3-23.3.el6_8.x86_64.rpm
    nss-softokn-freebl-3.14.3-23.3.el6_8.x86_64.rpm
    parted-2.1-29.el6.x86_64.rpm
    perl-5.10.1-141.el6_7.1.x86_64.rpm
  13.  Re-run the installer and repeat the steps above until all conflicting RPM's are added to the ignore list.

  14. Add "ignore_rpm_versions.conf" RPM and run the ScaleArc installer again using the command below.

    # ./custom_install.sh -c Rackspace
  15. Browse to the IP of the VM to access the ScaleArc UI.

On this page




Comments

    Add new comment