Cluster configuration checklist
The following table helps you identify your environment settings you need to provide ScaleArc to create and configure the cluster. The asterisk (*) indicates which settings are essential to get ScaleArc up and running. Some of the settings such as timeout values are required to tune ScaleArc for optimal performance. Review, complete, and save the table entries for future reference.
Complete the cluster checklist
| Setting type | Value |
|---|---|
Network |
xxx.xxx.xxxx |
| ScaleArc A IP address | |
| ScaleArc B IP address | |
| Primary DNS server IP address | |
| Secondary DNS server IP address | |
| DNS domain search suffixes | |
| NTP server(s) | |
Cluster and database |
|
Cluster |
|
| Cluster user | |
| Cluster user password | |
Cluster (client) |
|
| *Idle client connection timeout | |
| *Maximum client connections | |
Cluster (server) |
|
| Server connection timeout | |
| Idle server connection timeout | |
| Surge queue timeout | |
Client (Failover) |
|
| Failure timeout | |
| Flip-flop timeout | |
| Wait for sync | |
| Retry attempts | |
| Retry interval | |
Cluster (Debug) |
|
| Unresponsive server timeout | |
| Server | |
| *Maximum concurrent connections | |
| *Idle connection timeout | |
ScaleArc features |
|
| Read/Write Split (should be ON) |
|
| Caching |
|
| Query Routing |
|
| Firewall |
|
| Query level load balancing |
|
| SSL (if yes, requires a certificate and key) |
|
| Authentication offload (should be ON) |
|
On this page
Comments