Last modified Feb, 23, 2017
ScaleArc sizing

ScaleArc calculates the size of the appliance according to the number of active cores on the database servers serving your application traffic volume. ScaleArc Support generates a customer license, based on these sizing requirements. 

In the following section, we’ll look at each of the components required in a ScaleArc appliance and how to size them properly. Follow these steps:

Step 1: Determine the size for of ScaleArc

We determine the number of cores required in a ScaleArc appliance by examining the number of cores in the database servers that the ScaleArc appliance will serve. Review the following table:.

 

100 % active database
cores under management 
Up to 32 Up to 64 Up to 80 Up to 96 Up to 128 Up to 160 Up to 192
ScaleArc Size 4 cores 8 cores 10 cores 12 cores 16 cores 20 cores 24 cores

 Make sure to calculate as follows:

  1. Count the cores in the database servers that process the live READ or WRITE database traffic. 
  2. Do not count passive nodes, inactive slaves, or idle backup replicas.
  3. Determine what percentage of activity those cores consume at peak. 

If you intentionally overprovision your database servers, include the overprovisioned cores at the desired level of activity in your count.

To calculate the number of cores required for the ScaleArc appliance, divide the number of cores by 8, and then multiply the result by the percentage of activity in those cores at peak.

ScaleArc requires a minimum of four cores in each appliance. In case your calculation requires fewer than four cores, ScaleArc recommends you round up the calculated size of a ScaleArc license to four. Similarly, if the calculated size of a ScaleArc license comes out to an odd number, it must be rounded up to the next even number.

This value represents the size of the ScaleArc license.

Example 

If you have two active database servers, each with 48 cores, and their peak level of activity is 75%, that’s 96 cores, divided by 8, which is 12. 12 times 75% is 9, and since we round up to even numbers, you would need a 10-core ScaleArc license.

Step 2: Determine the number of processor cores  

The ScaleArc appliance needs additional CPU resources for the operating system and other overheads. The table in this section gives an overview of the processor core requirements in a ScaleArc appliance, depending largely on the CPU architectures in use. 

ScaleArc license size 4 cores 8 cores 10 cores 12 cores 16 cores 20 cores 24 cores

Intel Xeon Physical Cores (no Hyperthreading) 

6 12 12 16 20 24 32

Hyperthreaded Intel Xeon Physical Cores 

12 24 24 32 40 48 64

Other Cores (AMD, VM, Public Cloud) 

10 16 24 24 32 40 46

The amount of overhead required depends on the underlying CPU architecture and the size of the ScaleArc license. For instance:

 

  • If you are using Intel Xeon physical CPUs, add one core and then add an additional core for each of the four cores in the ScaleArc license. If the result is an odd number, round up to the next even number. If you have enabled hyperthreading in your Xeon, double the number of cores.
     
  • If you are using an AMD CPU or you’re running on a virtual machine, or are in the cloud, then your ScaleArc license gives you access to 50% more cores. In this instance, add one core and an additional core, plus one more core for every four cores in the ScaleArc license, add 50%, and round up to the next even number. You’ll use these cores for ScaleArc, without increasing the size of your license; our Fair Licensing model ensures that everyone gets the performance and capacity that they pay for.
     

Note that the number of ScaleArc cores may not exceed 85% of the cores in the entire ScaleArc appliance. 

Step 3: Determine the memory requirements

Use the following table to calculate the memory requirements for running ScaleArc: 

ScaleArc license size 4 cores 8 cores 10 cores 12 cores 16 cores 20 cores 24 cores
Memory (ScaleArc Enterprise Edition) 16 GB 16 GB 20 GB 24 GB 32 GB 40 GB 40 GB
Memory (ScaleArc Platinum Edition) 24 GB 40 GB 48 GB 54 GB 80 GB 96 GB 96 GB


Tip

  • If you are using the ScaleArc Enterprise Edition, then each core in the ScaleArc license should have 1 GB allocated to it. 
  • If you are using the ScaleArc Platinum Edition, each core in the ScaleArc license should have 4 GB allocated to it. 
  • The ScaleArc operating system and system overhead memory require at least an additional 4 GB. 

 

Step 4: Calculate the disk space

Use the following table to determine the disk space requirements:

ScaleArc license size 4 cores 8 cores 10 cores 12 cores 16 cores 20 cores 24 cores
OS/System disk 100 GB 100 GB 100 GB 100 GB 100 GB 100 GB 100 GB
Loggin disk 4 TB 8 TB 8 TB 8 TB 8 TB 8 TB 8 TB

The System/OS Disk:  ScaleArc requires a minimum of 100GB of space for its OS/System disk. ScaleArc recommends using solid state disks because of the increased performance.
 

Logging Disk:  ScaleArc requires a minimum of 500 GB of log space per core, which can be thin-provisioned on SATA storage or another slow type of disk storage. In general, ScaleArc recommends 4 GB of disk space on a 4-core ScaleArc license and 8 TB for more.

Logging storage requires 1 GB of storage for every two million queries stored. Add more disk capacity to retain more historical data. Production environments typically run with 1 TB or more of disk space to retain one to three months of historical data. Add more disk space to increase the number of retained transactions. If the ScaleArc appliance runs low on logging disk space, a ScaleArc service erases the oldest logs first. 

Step 5: Determine network requirements

 ScaleArc recommends using a pair of bonded or trunked network interfaces on the appliance.

ScaleArc license size 4 cores 8 cores 10 cores 12 cores 16 cores 20 cores 24 cores
Network

Two Bonded 1 GBE 

Two Bonded 1 GBE 

Two Bonded 1 GBE 

Two Bonded 1 GBE 

Two Bonded 10 GBE 

Two Bonded 10 GBE  Two Bonded 10 GBE 

Tip

  • For a ScaleArc license of 12 cores or fewer the bonded Ethernet devices can be 1 gigabit/second.
  • For a ScaleArc license larger than 12 cores, the bonded devices should be 10 gigabits/second. 

Step 6: Determine High Availability and redundancy

A single ScaleArc appliance can create a single point of failure. As a result, ScaleArc strongly recommends using two appliances in a redundant failover configuration for production implementations. Both appliances must be built with identical configurations in terms of the number of CPUs, memory, and disk space. 

Step 7: Determine the environment for ScaleArc

ScaleArc software can run on Bare Metal, a virtual machine (HyperV, VMware, KVM, or Xen), or in the cloud. ScaleArc is supported on Amazon Web Services (AWS), Microsoft Azure, VMware Air, and many other leading cloud providers

On-premise ScaleArc system requirements
100 % active database
cores under management 
Up to 32 Up to 64 Up to 80 Up to 96 Up to 128
ScaleArc size 4 cores 8 cores 10 cores 12 cores 16 cores
Intel Xeon Physical Cores (no Hyperthreading)  6 12 12 16 20
Hyperthreaded Intel Xeon Physical Cores  12 24 24 32 40
Other Cores (AMD, VM, Public Cloud)  10 16 24 24 32
Memory (ScaleArc Enterprise Edition) 16 GB 16 GB 20 GB 24 GB 32 GB
Memory (ScaleArc Platinum Edition) 24 GB 40 GB 48 GB 54 GB 80 GB
OS/System disk 100 GB 100 GB 100 GB 100 GB 100 GB
Loggin disk 4 TB 8 TB 8 TB 8 TB 8 TB
Network
Two Bonded 1 GBE 
Two Bonded 1 GBE  Two Bonded 1 GBE  Two Bonded 1 GBE  Two Bonded 10 GBE 

 



 



 


 

 

 


On this page

 

 

 

 

Comments

    Add new comment