Last modified Jul, 26, 2017
System config

Use this screen to configure the basic system settings.

Configure system settings

  1. Click the Settings tab > System Settings on the ScaleArc dashboard.



  2. Click the System Config tab.



  3. Complete the fields per section.

System Config and Administrative User

The first section identifies the ScaleArc appliance. Use the second section to create and manage the administrative user.

  1. Complete the fields as follows:

    Field Description Default/User input
    Hostname

    The logical name, used to manage the ScaleArc appliance. The hostname is used to identify ScaleArc software with the network. 

    Important

    If you plan to integrate with Windows AD, make sure you observe the maximum length recommended by Microsoft


    Enter a hostname.
    Username

    The username for the administrator.

    Enter a username.
    Current Password

    Password for the administrator.

    Enter the existing password.
    New Password The new password for the administrator. Enter a new password.
    Repeat Password A repeat of the new password for the administrator. Re-enter the new password.

Configuration

  1. Complete the fields as follows:

    Field/Button Description Default/User input
    Reset Stats Database

    Resets the live monitor processes so that the data on the graph is refreshed. 

    Warning

    Use this advanced option when the live monitor graphs get stuck. Note that you may lose up to 120 seconds of data from reset.


    Reset Configuration Lock

    Applies to when you receive the following error Operation failed. Database is locked.' This occurs when the system does not release the lock on a table of an internal database.  

    Click this option to release the lock and modify the table.
    Backup Configuration Database

    Creates an archive of the current system configuration. The system stores it in /system/idb.cfg.enc on the ScaleArc filesystem. The resulting archive is also automatically downloaded to the user workstation via the web browser.


    Restore Configuration Database

    Restores from a previously created Backup Configuration Database archive file.

    Warning

    Note that the backup and restore functions are meant as entire system replacements. The restoral function requires that the IP address and hostname of the ScaleArc device be identical to the one captured in the backup archive file. These functions are meant to create a replacement ScaleArc system, should the hardware suffer a catastrophic failure. They are not meant to migrate a configuration from one ScaleArc system to another.


Data and Timezone

  1. Complete as follows:

    Field Description Defaults/User input
    Date

    Specifies the system date and time in the format MM-DD-YYYY hh:mm:ss

    Select a date and time format.
    Timezone

    Selects the time zone for the system. 

    Identify a timezone.
    NTP Server

    IP address or hostname of the NTP server e.g., clock.redhat.com or pool.ntp.org. You can configure multiple NTP servers (maximum of 3). The first server in the list should be the Primary NTP server. 

    Enter the servers, separated by spaces.

Security settings

  1. Complete as follows:

    Field Description Default/User input
    Session Timeout Interval

    Logs off users' inactive sessions after a

    specific period of time.

    Default value is 10 minutes.

    1

    Customize your timeout interval.

    2

    Click Apply.

    API Key

    Required before you can start using ScaleArc APIs. Your API key is a unique alphanumeric identifier associated with your account and is used for universal authentication commands for all of your services. 

    1 Click on Show API Key.
    2 Enter your administrator
    username and password .
    3 Click to display the API Key.


    To regenerate the API key:

    1 Click Generate API Key.
    2 Enter your username and password and click on Submit.
    Enabled SSH Port

    The port where SSH is configured. 

    Default: SSH is disabled.
    Enable SSH

    The option to select SSH port or use the default Port 22. You can set the password manually or use the option of auto-generate the password.

    The SSH session's auto-generated password displays for only 30 seconds after you have entered the admin username and password. Please make note of it before it disappears.

    1 Click Enable SSH.
    2 If you have selected Auto-generated, enter your ScaleArc UI admin username and password to derive the SSH password.
    3 Alternatively, if you choose the user-defined option, enter your selected password. Then, enter the ScaleArc UI admin username and password to derive the SSH password.
    4 Click Submit.
    Disable SSH Disables SSH on port 22.
    1 Click Disable SSH.
    2 Enter your administrator username and password.
    3 Click Submit.
    Upload SSL Certificate

    By default ScaleArc uses a self- signed certificate for communication via HTTPS. Since it is self-signed, the system displays an untrusted certificate alert while accessing ScaleArc. To resolve the untrusted certificate issue, you can purchase and upload a SSL certificate and its key by selecting this option.

    Access ScaleArc using the Common Name in the certificate you are uploading.

     

    1 Click Browse to locate and
    upload your SSL certificate and private key.
    2 Click Submit. 



On this page


Comments

    Add new comment