Welcome to the ScaleArc setup!

Now that you've installed ScaleArc transparently in the network you are ready to configure the initialization parameters for the application. The wizard prompts you through some of the settings to get the application up and running. 

Configure basic operating parameters

Follow these steps to get started.

1.  Click on Setup ScaleArc in the Welcome screen. 

   
   
   

2. This screen appears only once, when you begin initialization.  
   
   

   Complete the fields as follows:

   Field/Button	Description	Default/User input
   Hostname	Logical name used to manage the ScaleArc appliance. Hostname is used to identify ScaleArc software with the network.  Important If you plan to integrate with Windows AD, make sure you observe the maximum length recommended by Microsoft.	Enter a hostname.
   IP Address	Default Gateway's IP Address.	Enter the IP address.
   Primary/Secondary DNS	IP Address for the Primary and Secondary DNS. ScaleArc uses these settings to translate network names to IP addresses.
   Time Zone	The time zone for the system.	Identify the time zone. The default is GMT.
   Time Server	The NTP Server used by ScaleArc. This value must be configured for ScaleArc systems that form an HA pair.  Important Do not skip the NTP time server setup; if un-configured it could lead to later problems, such as synchronization between HA partners, Windows AD integration, and so on.	Enter the name of the NTP Server.
   Administrative Username	The username for ScaleArc’s main administrative user, which is used for subsequent logins to this web console.	Enter a username.
   Administrative Password	The password for ScaleArc’s main administrative user; this is used for subsequent logins to this web console.	Enter a password.
   Confirm Password	Repeat the password previously entered.	Re-enter password.
   Upload License button	Loads the ScaleArc license.  All free trial licenses are valid only for 30 days. Refer to ScaleArc sizing for more information on the different types of licenses.	Click the Upload License button.
   Apply Settings button	Loads an Applying Configuration dialog.	Click the button to apply the settings.
   OK button	Exits the configuration mode.	Click OK.

    

    

3. Click to upload the ScaleArc license. Refer to ScaleArc sizing for more information on the different types of licenses, based on your capacity requirements. Wait for the appliance to upload the license and confirm it is working. A successful upload turns the text on the Upload New License button from gray to white.  

4. Click the Apply Settings button. The appliance loads an Applying Configuration dialog, then displays a “Settings are saved successfully” dialog.
   
   
   
   
5. Click OK on this dialog. 
6. Log in using the administrator user name and password you set earlier. Once logged in, you see the ScaleArc dashboard.
   You may wish to clear the notifications that may have occurred during installation in the Events tab.
   
   
   
   
   
7. Review the ScaleArc dashboard before following the wizard to define these basic configurations.

Initialize ScaleArc on AWS

Follow these procedures to initialize ScaleArc on AWS.

1. Complete the fields as follows:

   Field/Button	Description	Default/User input
   AWS Instance ID	Instance ID for the AWS Instance.	Enter an AWS instance ID.
   Time Zone	The time zone for the system.	Identify the time zone. The default is GMT.
   Date	The date for the system.	Select the date for the system.
   Time Server	The NTP Server used by ScaleArc. This value must be configured for ScaleArc systems that form an HA pair.  Important Do not skip the NTP time server setup; if un-configured it could lead to later problems, such as synchronization between HA partners, Windows AD integration, and so on.	Enter the name of the NTP Server.
   Administrative Username	The username for ScaleArc’s main administrative user, which is used for subsequent logins to this web console.	Enter a username.
   Administrative Password	The password for ScaleArc’s main administrative user; this is used for subsequent logins to this web console.	Enter a password.
   Confirm Password	Repeat the password previously entered.	Re-enter password.
   Upload License button	Loads the ScaleArc license.  All free trial licenses are valid only for 30 days. Refer to ScaleArc sizing for more information on the different types of licenses.	Click the Upload License button.
   Apply Settings button	Loads an Applying Configuration dialog.	Click the button to apply the settings.
   OK button	Exits the configuration mode.	Click OK.

    

    

2. Click to upload the ScaleArc license. Refer to ScaleArc sizing for more information on the different types of licenses, based on your capacity requirements. Wait for the appliance to upload the license and confirm it is working. A successful upload turns the text on the Upload New License button from gray to white.  

3. Click the Apply Settings button. The appliance loads an Applying Configuration dialog, then displays a “Settings are saved successfully” dialog.